£20 off your first order over £200* - Simply enter code SAVE20 at the basket!

DBX 215S

DBX 215s Dual Channel 15-Band Graphic Equalizer

    view all DBX products

    Product Code: 100083276

    Pre Order

    £125.00
    "With the dbx heritage of revered pro EQs, the 215s meets the needs of the most demanding sound reinforcement environments, while offering the simplicity of straightforward controls."
  • Input Connectors: 1/4" TRS, female XLR (pin 2 hot)
  • Input Type: Electronically balanced/unbalanced, RF filtered
  • Input Impedance: Balanced 40 kOhm, unbalanced 20 kOhm
  • Max Input: >+21dBu balanced or unbalanced
  • CMRR: >40dB, typically >55dB at 1kHz
  • Output Connectors: 1/4" TRS, male XLR (pin 2 hot)
  • Output Type: Impedance-balanced/unbalanced, RF filtered
  • Output Impedance: Balanced 100 ohm, unbalanced 50 ohm
  • Max Output: >+21dBu balanced/unbalanced into 2 kOhm or greater; >+18dBm balanced/unbalanced (into 600 ohm)
  • Bandwidth: 20Hz to 20kHz, +0.5/-1dB
  • Frequency Response: 50kHz, +0.5/-3dB
  • Dynamic Range Typically: >112dB
  • Signal to Noise Ratio: Typically >95dB
  • THD+Noise:
  • Interchannel Crosstalk:
  • Bypass Switch: Bypasses the graphic equalizer section in the signal path
  • Low cut Switch: Activates the 50Hz 12dB/octave Bessel high-pass filter
  • Range Switch: Selects either +/- 6dB or +/- 12dB slider boost/cut range
  • Operating Voltage: 100VAC-240VAC 50/60Hz
  • Power Consumption: 15W
  • Power Connector: IEC receptacle
  • Unit Weight: 4.8 lbs.(2.2 kg)
  • Shipping Weight: 6.2 lbs.(2.8kg)
  • Dimensions: 1.75" (4.4cm) H x 6"(15.24cm) D x 19" (48.26cm) W
  • Dual 15-band, 1/3-octave Constant Q frequency bands
  • Switchable boost/cut ranges of ±6 or ±12 dB
  • Front panel bypass switch
  • ±12 dB input gain range
  • 4-segment LED ladders for monitoring output levels
  • XLR and TRS Inpts and Outputs
  • Frequency Response of 50kHz
  • Dynamic range of greater than 108dB
  • Only registered users can write reviews. Please, log in or register