£20 off your first order over £200* - Simply enter code SAVE20 at the basket!

DBX 223XL

DBX 223XL 2 Way Stereo 3 Way Mono Crossover (XLR Connections)

    view all DBX products

    Product Code: 100083296

    Availability: Pre Order

    £179.00
    "The industry satndard in crossovers. It boasts excellent sound and build quality with accurate adjustments for crossover frequency and output and input levels. You will find sturdy Neutrik XLR connections only on the rear."
  • Input Connectors : XLR
  • Input Type : Electronically balanced/unbalanced, RF filtered
  • Input Impedance : Balanced >50k ohm, unbalanced >25k ohm
  • Input Max Input Level : >+21dBu balanced or unbalanced
  • CMRR : >40dB, typically >50dB at 1kHz
  • Output Connectors : XLR
  • Output Type : Electronically-balanaced/unbalanced, RF filtered
  • Output Impedance : Balanced 60 ohm, unbalanced 300 ohm
  • Max Output Level : >+20dBu balanced/unbalanced into 600 ohms or greater
  • Bandwidth : 20Hz to 20kHz, +/-0.5dB
  • Frequency Response : 90 kHz, +0/-3 dB
  • Signal-to-Noise : Ref: +4 dBu, 22 kHz measurement bandwidth
  • Stereo Mode : >94dB (Low Output)
    >92dB (High Output)
  • Mono Mode : >94dB (Low Output)
    >93dB (Mid Output)
    >92dB (High Output)
  • Dynamic Range : > 114 dB, unweighted, any output
  • THD + Noise :
  • Interchannel Crosstalk :
  • Stereo Mode : Low/High 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting)
  • Mono Mode: Low/Mid : 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting)
  • Mid/High : 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting)
  • Filter type : Linkwitz-Riley, 24 dB/octave, state-variable
  • Front Panel (Low Cut) : Activates 40 Hz Butterworth, 12 dB/octave high-pass filter, one switch per channel
  • Phase Invert : Inverts the phase at the output, one switch per output
  • Rear Panel : x1 / x10: : Multiplies the low-high(mono: low/mid and high/mid) crossover frequency range of the front-panel markings by a factor of 1 or 10, one switch per channel
  • Mode : Selects stereo 2-way or mono 3-way operation and disables all LEDs for controls that are non-functional in the selected mode
  • LF sum : Selects normal (stereo) or mono-summed low frequency operation and disables Ch 2's low output phase invert LED to indicate that this output is not operational in the LF sum mode
  • Stereo Operation : Green LED
  • Mono Operation : Yellow LED
  • Low Cut : Red LED per channel
  • x10 : Green LED per channel
  • Phase Invert : Red LED per output (2 per channel)
  • Operating Voltage : 100 VAC 50/60 Hz; 120 VAC 60 Hz 230 VAC50 HZ
  • Power consumption : 15W
  • Main Connection : IEC 320 receptacle
  • Dimensions : 1.75" H X 19" W X 6.9" D (4.4cm x 48.3cm x 17.5cm)
  • Weight : 3.7 lbs. (1.7 kg)
  • Shipping Weight : 5.4 lbs. (2.5 kg)
    Note: Specifications subject to change without notice.
  • XLR balanced ins and outs
  • Mode switch for stereo 2-way or mono 3-way operation
  • Low frequency summed (subwoofer) output
  • x10 range switch on both channels
  • 40Hz high pass (low cut) filter both channels
  • Phase reverse switch on all outputs
  • Individual level controls on all outputs
  • 24dB per octave Linkwitz-Riley filters (the professional standard)
  • Stereo/Mono status LEDs indicate the selected mode
  • dbx® 2 year parts and labor as standard
  • CSA NRTL/C approved
  • CE compliant
  • Only registered users can write reviews. Please, log in or register