£20 off your first order over £200* - Simply enter code SAVE20 at the basket!

QSC E15 Passive PA Speaker

The E15 is a two-way loudspeaker using a 15-inch, 500W, die cast aluminum frame woofer with a 3.5-inch voice coil

Key Features:

  • High output, professional quality sound with E15 – 500 W continuous power
  • Advanced digital signal processing tunings and options using QSC GXDPLD amplifiers or TouchMix digital mixers
  • Titanium diaphragm for high fidelity and long life
  • Rugged tour-grade textured paint
  • Foam-lined perforated steel grill
  • Available U-Style Yoke and M8 rigging kit for permanent installation
  • Dual angle pole socket

    view all QSC products

    Product Code: 100268359

    Pre Order

    £660.00

    Buy the QSC E15 Passive PA Speaker with INTEREST FREE FINANCE

    From just per month
    Finance Options

    The E15 is a trapezoidal, two-way loudspeaker using a 15-inch, 500W, die cast aluminum frame woofer with a 3.5-inch voice coil. It is intended for use when high-power and authoritative low-end are needed from a full-range loudspeaker. A 2.8” compression driver attached to the 75° DMTTM waveguide assures that even distant listeners will be well covered.

    E Series loudspeakers will perform very well with any quality, professional power amplifier – but by taking advantage of the complete E Series Entertainment System, more performance and options are available. Today’s powered loudspeakers rely on finely tuned digital signal processing (DSP) to achieve a higher level of performance. When used with QSC GXD or PLD amplifiers or with a QSC TouchMix digital mixer, E Series loudspeakers can also take advantage of advanced DSP. QSC has developed E Series DSP settings for all three platforms. These settings support a variety of applications including live sound reinforcement (with and without subwoofers), stage monitoring, dance music and karaoke.

    Model E15
    Configuration 1 x 15-inch, 2-way, non-powered 
    Frequency Range (-6 dB) 55Hz – 20kHz
    Power capacity²: continuous/peak 500 W / 2000 W
    Sensitivity  97dB, 1W@1m
    Coverage Angle 75° conical DMT
    Output (peak SPL @ 1 m) 130dB

    Drivers

    LF

    HF

     

    381 mm (15-inch) driver with 89 mm (3.5-inch) voice coil

    38 mm (1.5-inch) exit, 71 mm (2.8-inch) voice coil, compression driver 

    Nominal Impedance
    Cross-over Full-range only 1.55kHz 
    Input connectors  2x NL4, 1 x barrier strip
    Enclosure  Trapezoidal, plywood, black texture paint finish. Two side-mounted handles, Perforated, powder-coated steel grille with foam lining.
    Mounting and suspension  6 x M8 suspension points, dual angle, 35mm pole-socket
    Net weight 31 kg / 68 lbs
    Shipping weight 34 kg / 75 lbs 
    Dimensions
    (WxHxD) 

     420x716x445mm

    16.5x28.2x17.5in

    Only registered users can write reviews. Please, log in or register